Sewing the Princess and the Pauper Gown:
Research, Patterns, and the Making of a Dream Dress
A Dress,
A Story,
A Beginning
This project started as a shared dream between my best friend and I. Taking something so beloved from our childhoods and bringing it into the real world was a complex but deeply rewarding experience.
The animated movie Barbie as the Princess and the Pauper was loosely inspired by the 1881 Mark Twain novel The Prince and the Pauper, but the film itself is set in a generalized medieval‑European aesthetic without a specific historical date. When we decided to recreate these dresses, it was important to us that we honored the original designs while still creating a historically grounded interpretation — or at least as close as we could reasonably get. Our main goal was to make the dresses look like clothing that could have been worn in the period, not just costumes. That meant research, attention to detail, and quality construction were essential.
Both dresses followed the same overall process aside from the final decorative elements, so for simplicity’s sake I’ll be referencing only my gown for the majority of this post.
To narrow down our timeframe, we focused on the 1740s–1750s. This range closely resembles the silhouettes and details seen in the movie, and picking a specific date helped to ground the research for this project.
Gowns from this era relied on a very particular system of layering. To achieve the silhouette of this dress, it was necessary to build the shape from the ground up. A project like this cannot be made from a single garment alone. The layers for this gown included: a chemise, a pair of bodies, a tulle petticoat, tie‑on pockets, a cotton petticoat, an overskirt, a stomacher, and finally the main gown. I’ll also be going over the accessories we made to finish the look.
The Chemise
We start with the chemise. This is a gathered but loose flowing undergarment worn directly against the skin. The chemise has existed for many centuries, though its name and specific function have shifted over time. In the 1700s it was usually made from cotton or linen, and its purposes included keeping expensive hard‑to‑wash outer fabrics from touching the skin, wicking away oils and dirt, and protecting the body from chafing against corsets or stays. All of this makes the chemise an essential foundational layer for comfortably wearing dresses like the one here. Its cut and style changed depending on the fashion of the period, and in some eras it even became a decorative element. Generally, though, it remained a simple garment to make, clean, and replace as it wore out.
Construction
The chemise style chosen for this project was a 1700s Italian chemise based on Festive Attyre’s blog post How to Make an Easy Italian Chemise: http://www.festiveattyre.com/p/how-to-make-easy-italian-chemise.html

I used the same basic pattern shown in Festive Attyre’s diagram, though I did make a mistake while cutting out my pieces and ended up with a front panel that was slightly shorter than the back. I fixed this by turning it into a high‑low hem. The only other differences were shortening the sleeves to work better with the main dress and choosing not to cut my square gussets into triangles.
Materials:
- This chemise was made from 4 yards of basic unbleached cotton, though 3 yards would have been plenty if I hadn’t originally made the longer‑sleeved version
Construction
All seams in the following steps use a 5/8″ seam allowance unless indicated differently.
Step 1: Attach Gussets to Sleeves
- Using the diagram above as a guide, pin each gusset to one side of a sleeve piece with right sides together
- Sew the gussets to the sleeves
Step 2: Attach Sleeves and Gussets to the Front Panel
- Flip the sleeve side with the attached gusset over on top of the front panel with right sides together
- Adjust the panel until the seam between the sleeve and gusset are two inches down from the top of the front panel
- Sew the sleeve and gusset to the front panel only where it is overlapping
- Repeat with second sleeve
Step 3: Attach Sleeves to the Back Panel
- On the side of the sleeve without the gusset, flip the sleeve over the back panel with right sides together
- Adjust until the sleeve edge is 6″ down from top edge of the back panel
- Sew the sleeve to the back panel
- Repeat steps on other sleeve
Step 4: Sew Side Seams and Finish the Gussets
- Unfold all of the sewn fabric so it lays flat with right sides up (it should look like the diagram above)
- Fold the back panel on top of the front panel with right sides together
- Ensure the side seams on the front and back panels line up and that the raw seams of the sleeves match up. The dress should look like a T at this point
- Fold the gusset over so it meets the other sleeve side and the back panel and pin. It should look like a diamond between the sleeve and the main gown
- Starting at the gusset continue pinning down the sleeve and the side seam
- Sew the sleeve seam and side seam. Ensure the gusset is also sewn in place properly. It will be necessary to pick up the needle and adjust around the gusset so the seam allowance is not stitched down while attaching the seams
Step 5: Finishing the Seams
- I finished all raw seams but the neckline with hand‑stitched flat‑felled seams but this can also be achieved with machine stitching
- The bottom of the sleeve and the bottom hem were finished with a small rolled hem
Step 6: Gathering the Neckline
- Run two gathering stitches along the neckline in four sections: front, sleeve, back, sleeve
- Pull the gathers until the neckline fits comfortably. Secure with pins while still adjusting fit and trying on dress. Once it’s at the correct size secure the gathers by tying the tails in knots
- Encased the gathered edge in a 2″ wide bias binding made from the same material as the chemise
For more detail on the sewing process, you can find the tutorial video here: https://youtu.be/8V7xIahqTUM?si=sL7HU0Uh5HxTqZ92
Even though the chemise is one of the simplest pieces in this project, they are always satisfying to make. It’s soft, practical, and it sets the tone for the rest of the gown. With this layer complete, we can move on to the structure of the dress: a pair of stays.
A Pair Of Stays
A pair of stays, also known as a pair of bodies (or a corset in modern terms), is a fitted, boned garment laced onto the body to support the bust, distribute the weight of the skirts so they don’t dig into the waist, and create the desired silhouette of the decade. This is the structure the rest of the dress will be built upon.

I patterned the corset to my own measurements using Stays and Corsets: Historical Patterns Translated for the Modern Body, Volume 2 by Mandy Barrington. This book has been a highly valued part of my collection for years — I’ve made several corsets from it already and have more planned. Drafting this pattern was one of the most time‑consuming parts of the project simply because of how much math is involved to draft a corset, though the math itself can be fairly simple.
Materials:
- 1 yard unbleached cotton
- 1 yard duck cloth
- plastic boning
- 42 metal grommets
- silk cord
The one thing the book lacks is assembly instructions, so the steps we followed were as follows:

Construction
Step 1: Baste the Layers Together
- Hand‑baste the cut out pattern pieces of unbleached cotton to the duck cloth with wrong sides together, except for the back panel that will have the grommets for lacing
- Cut out the duck cloth using the cotton pattern pieces as a guide
- These two layers will be treated as one throughout the rest of the construction
Step 2: Stitch the Pattern Pieces Together
- Sew the back seam of the cotton and duck cloth with right sides together
- Turn the back panel inside out so the right sides of the fabric are outward and the raw seam is incased
- Sew a running stitch along the back panel with a seam allowance slightly bigger than the boning chosen for the project
- Using the pattern and diagrams in the book as a guide, sew all of the pattern pieces for the stays together with a 5/8″ seam allowance
- Finish all the raw edges with a zig‑zag stitch except the top and bottom edge
Step 3: Mark and Sew the Boning Channels
- Remove all the basting stitches
- Mark each boning channel according to the pattern and/or the size of your boning
- Stitch the channels, leaving the top and bottom open so the boning can be inserted between the two fabric layers
Step 4: Cut and Insert the Boning
- Measure each channel individually
- Cut the plastic boning to the correct length for each channel
- Insert the boning into the channels, including the channel made earlier on the back panel
Step 5: Bind the Top and Bottom Edges
- Finish the top and bottom edges with a 1″ wide bias binding made from the same cotton as the rest of the stays
- The tabs at the bottom require patience — maneuvering the binding around the tabs takes time
Step 6: Add the Grommets
- Mark the placement for the grommets
- Set all 42 grommets (though I would recommend using about half this amount for easier lacing)
Stays and corsets are always a fun challenge when making historical garments. There are so many styles, materials, and construction methods to choose from that each piece becomes truly unique to the wearer. This pair of stays created the structure for the entire gown and was one of the more satisfying parts of the project to complete.
Tulle Petticoat
This is the first deviation from historical accuracy that we took. We needed a foundational skirt layer that could take the weight of the other skirts and the main gown while creating that big, beautiful bell shape that slopes from the waist. The usual choice for this time-period would have been a crinoline or hoop skirt. However the light pink tulle felt more in line with the Barbie spirit we wanted to emulate with these dresses.
Materials:
- Scraps of unbleached cotton from the chemise
- 54 in x 20 yard tulle bolt
Construction
We built the tulle petticoat as a tiered skirt, with the a smaller height and longer width for each tier until it reached the floor. Because tulle is so delicate, we used the sewing machine’s natural gathering ability instead of gathering everything by hand. Setting the tension to 5 and the stitch length to 4 caused the machine to gather the tulle automatically — a helpful trick that worked in place of a gathering foot.
Since this method gathers unpredictably, we didn’t pre‑measure or pre‑cut the tulle. Instead, we worked tier by tier:
Step 1: Gather the First Tier
- Gather the full length of the tulle strip using the tension/stitch‑length method
- Cut the gathered strip down to the desired waist measurement
- Trim the length to the desired height of the first tier
Step 2: Build the Remaining Tiers
- Repeat the gathering process for the next strip of tulle
- Attach it to the bottom of the first tier
- Trim the length once attached
- Continue gathering and attaching strips until the tier reaches the desired fullness
- Repeat for each tier until the skirt reaches the floor
This method is time‑consuming, and trimming the length after each tier is attached can be taxing simply because of how long each tier becomes. But the effect is worth it — the skirt gains a soft, cloud‑like volume that supports the layers above it beautifully.
Step 3: Attaching the Waistband
Once all the tiers were assembled, it was time to attach the waistband.
The skirt uses a tie‑on waistband designed to reduce bulk around the waist. This construction method is semi‑historically accurate for petticoats of this era, as tie‑on waistbands allowed for:
- a fully adjustable fit
- open side seams
- easy access to tie‑on pockets
The center front and center back of the waistband were made slightly wider to reduce the strain on top of the skirt and to keep smooth lines against the stomach, with the ties themselves being fairly small in width by comparison to reduce bulk. Depending on the garment, a thinner waistband would have been more common for hidden petticoats, but this wider version worked well for the silhouette we needed.
This petticoat was one of the more time‑intensive layers, but it added exactly the right amount of Barbie‑inspired whimsy while still supporting the historical silhouette. Once this layer was finished, the rest of the skirts had a beautiful foundation to build upon.
Tie On Pockets
I’ve talked about tie‑on pockets before, but I will never get tired of them because they are some of my favorite things to make. Women’s clothing not having built‑in pockets was a design choice in the 17th and 18th centuries, largely because the layers of skirts allowed for something even better: tie‑on pockets. These pockets could be made as large as you wanted and transferred from outfit to outfit, meaning you were never without storage. The pair of stays helped distribute the weight of both the skirts and the pockets, and because the pockets were an independent structure, no matter how heavy they became, they never interfered with the silhouette of the skirts.
Materials:
- pink cotton scraps from cotton petticoat
- elastic thread
- button
- 1″ twill tape
I have a free pattern for historically inspired tie‑on pockets available in my shop, and that pattern served as the base for this project.
Pattern link: 18th Century Pocket Pattern
Adjustments for This Project
Because we planned to wear these dresses at a Renfaire, I made a few adjustments to the pocket pattern to make them more secure:
- Horizontal opening: I shifted the opening from vertical to horizontal. This isn’t historically necessary, and it did make the pockets harder to access, but it gave me peace of mind for a long day of walking, sitting, and moving around crowds. This also made the bottom of the pocket slightly larger.
- Button closure: I added a button and a braided elastic loop to ensure the pockets remained securely closed the whole day. The buttons and elastic where secured with hand stitching.
These changes were small, but they made the pockets feel sturdier and more practical for the event.
Tie‑on pockets are one of those historical details that feel both charming and incredibly practical. They add a layer of authenticity to the gown, and they’re genuinely useful — especially for long days at events. With the pockets finished, the next layers of the skirt could be built knowing there was a secure place to store essentials.
Cotton Petticoat
The cotton petticoat is an in‑between layer that smooths out the lines of the tulle petticoat, hides the tulle, and provides a solid color base for the overskirt.
Materials:
- 4 yards cotton
The pattern for this layer was a simple floor‑length circle skirt attached to the same tie‑on waistband used for the tulle petticoat. We left the side seams open at the top just enough to put the skirt on and to fit a hand through for pocket access. This construction method reduced bulk at the waist while still achieving the full, rounded shape at the hem. For this skirt we bought 4 yards of cotton and still had plenty left over.
This petticoat may be simple, but it plays an important role in the silhouette. It softens the volume of the tulle and creates a clean, opaque base for the overskirt, helping the final gown look cohesive and intentional.
Shiny Organza Overskirt
The overskirt was made from a shimmery pink sheer organza. We used three yards of fabric, gathered it down to the waist measurement, and attached it to the same tie‑on waistband design used for the other skirt layers. The waistband fabric was cut from the extra length trimmed from the bottom of the skirt.
Materials:
- 3 yards sheer organza
Once the overskirt was in place over the cotton petticoat, we trimmed it to the correct length. This ensured it fell evenly with the other skirts while still accommodating the extra volume created by the tulle petticoat underneath.
Historically, gowns relied on multiple skirt layers to build out the silhouette and achieve the desired shape and effect. The combination of materials and construction methods gave us the soft, voluminous Barbie look we were aiming for while still respecting the structure of 18th‑century dressmaking.
This overskirt was the first layer where the Barbie color palette really started to shine, and seeing it over the foundational skirts made the silhouette come alive. With this piece finished, the gown finally started to resemble the movie design in a way that felt both realistic to the movie and grounded in historical construction.
The Stomacher
A stomacher is a separate piece worn at the center front of the body to hide the skirt waistbands and the pair of stays. Traditionally, stomachers were covered in embroidery or decorative elements that matched the main gown, creating the illusion of a single seamless garment without visible closures. My friend followed this approach for her dress, making a beautifully decorated stomacher that matched Anastasia’s gown design from the movie.
My dress, however, needed something slightly different. In the movie, the chemise ruffles and a solid structure are clearly visible at the center front, and I wanted to stay close to that look. At the same time, I still needed a structured piece to hide the skirt waistbands and smooth out the silhouette. The compromise I came up with to solve this problem was a half stomacher made in the same color as the pair of bodies so it would blend seamlessly while still doing it’s job of hiding the skirt waistbands.
Materials:
- scrap unbleached cotton
- scrap duck cloth
- plastic boning
Construction
To create a stomacher, I:
- traced a general shape that filled in the center‑front point I wanted
- made sure it was wide enough that the edges would be covered by the gown when worn
- used a bag‑lining method to finish the edges cleanly
- added boning to the back of the stomacher so it would hold its shape and blend into the stays
My friend made hers from scraps of the cotton petticoat and organza overskirt, then added decorative stitching, ribbon, and pearls.
Closure Choice
Historically, the stomacher and the front of the gown were pinned to the pair of bodies to stay in place. For this project, we decided to add lacing to the front of the gown instead. This was a less common closure method for this style of dress, but there are still plenty of historical examples, and it suited the look we were recreating while feeling more secure.
This half stomacher ended up being one of my favorite small details in the entire gown. It kept the silhouette smooth, honored the movie design, and added just enough structure without distracting from the softness of the chemise and overskirt.
The Mantua Gown
The mantua gown is a genius piece of patterning that became extremely popular in the 1700s. This style of gown is cut as one main piece (with the exception of the sleeves) and shaped through intricate pleating to achieve its distinctive silhouette. Because the gown is cut in one continuous length, it was easily adjustable and had very few raw seams inside. Historically, these seams were often left unfinished because the tightly woven silk didn’t fray. Modern fabrics don’t behave the same way however, so I finished the few raw edges with hand‑sewn whip stitching rather than adding a full lining.
Patterning the Gown
This mantua was patterned from The Cut of Women’s Clothes by Norah Waugh and Margaret Woodward. When scaling the pattern up to full size, I accidentally made it slightly too small. We fixed this with a few sleeve adjustments and by adding an extra panel of fabric to lengthen the bottom of the skirt. This ended up being a happy accident — the added strip created a beautiful finish on the completed gown.
Materials:
- 5 yards of damask or jacquard satin
- 16 grommets
- silk lacing
- scraps of fabric from the rest of the gown for the ruffles (chemise cotton, blue jacquard, pink organza)
Damask and Jacquard were extremely common in the 18th century, though historically they would have been woven from silk and would have been a much higher quality then found in modern fabrics. Ours was a modern polyester blend, but the woven floral pattern still captured the spirit of the period beautifully.
Understanding the Pattern
Page 73 of The Cut of Women’s Clothes contains the instructions I used for assembling this gown. Because the dress is cut in one piece, the pattern can look complex at first glance so I am breaking it down into segments:
- The Main Body (cut in one piece)
The dashed line along the back indicates a cut on fold — meaning the pattern shows only one half of the gown.

- The Pleated Skirt Panels
The side skirts are created by pleating down the width of fabric between the front and the back of the pattern. The sliver of fabric cut between the skirt and the top and back sections of the pattern leave room to pleat and attach the skirt to the main bodice cleanly.

- The Front Fold Panel
This fold hides the raw edge and creates the space for the hidden grommets.

- The Back Binding Piece and Back Pleats
The back is pleated down using the image guide and the binding piece then secures the pleats and forms the shoulder seams.


- The Sleeves
Cut separately from the main gown and is sewn on last.


Construction
Step 1: Pleat the Skirt Panels
- Pleat the skirt toward the center back
- Where the pleats meet, form an inverted box pleat
- We used roughly 2-inch spacing, adjusting as needed until the pleats laid smoothly
- Hand‑baste the pleats in place to keep them secure while completing the next steps
Step 2: Attach Skirt to Bodice
- Stitch the side seams of the bodice with right sides together
- Finish the raw seams of the bodice sides
- Flip the raw edge of the skirt toward the inside of the gown from the front of the gown with right sides together
- Whip stitch this fold down from the outside
- Roll and whip stitch the remaining raw edges from the inside of the garment
Step 3: Construct the Back Pleats
- Stitch the back seam where the cut‑on‑fold ends with right sides together. This creates the inverted V pleat at the waist
- Following the pattern lines: fold the solid line to meet the dotted line
- Historically, only the top of these pleats were stitched down. For this project, we stitched the pleats down to the end of the indicated lines. This gave:
- a crisp tight to the back pleated look
- a better fit
- less free‑floating fabric
- a silhouette closer to the Barbie movie design
Step 4: Construct the Front Fold Panel
- Fold the solid line to meet the dotted line
- Fold the front raw seam over top of this fold with the raw edge folded inside so it is incased
- This fold should:
- hide the raw edge
- create a under fold for the hidden grommets
- shapes the front of the gown
- Secure the fold with a row of stitching on the side of the pleat closest to the skirts
- My friend extended her fold all the way down the skirt
- I stopped mine just below the waist because I needed to add different fabric in this area to match the pauper’s dress
Step 5: Attach the Front Panel to the Back Binding
- Stitch the top of the front fold panel to the back binding piece
- This forms the shoulder seams and the armholes
- I enlarged the binding piece slightly so it fit the adjusted back pleats better
- Finish the raw edges with whip stitching
Step 6: Construct and Attach the Sleeves
Sleeve Construction
- Run a gathering stitch along the top edge
- Stitch the side seam, paying attention to left vs. right sleeve orientation
- Finish the raw edges of the sleeve seam and the bottom edge of the sleeve
Attaching the Sleeves
- Loosely gather the top ruffle and pin into the armhole with right sides together
- Ensure both sleeves sit symmetrically:
- side seams aligned
- gathers evenly distributed
- Stitch with a 5/8″ seam allowance
- The sleeve should sit right against the front fold without cutting into it
- The side seam should sit slightly forward under the arm
Sleeve Ruffles
- Multiple layers of scalloped fabric encased in binding
- Materials: chemise cotton, blue jacquard, pink organza
- Edges finished with hand done ladder stitching
Fit Adjustment
Because the pattern was slightly small, the sleeves were tight along the bottom edge. We opened the bottom of the side seam and inserted an extra strip of fabric to fix the fit.
Step 7: Final Adjustments
- I added extra ruffles to the top of the scalloped ruffles
- My friend did the same and also added ruffles along her waist
- We added an extra strip of fabric along the bottom edge to extend the length and finish the hem — attached like an oversized bias binding
Step 8: Closures and Decoration
- Add grommets to the hidden fold at the front of the gown
- I also stitched decorative floral fabric along the front edges of the skirt
This gown was the most complex part of the entire project, but also the most rewarding. The mantua’s one‑piece construction, the pleating, the sleeves, and the final decorative touches all came together to create a truly beautiful dress that felt both historically grounded and true to the Barbie movie design. Seeing it layered over the chemise, stays, and petticoats made the silhouette come alive in a way that felt truly magical.
Accessories
No costume is finished without its accessories. We added three main elements to complete the look of these Barbie gowns: the headpieces, the heart necklaces, and the hand fans.
The Headpiece
My friend chose a historically inspired French hood from the 1600s–1700s, which fit perfectly with the upper‑class aesthetic of the princess gown. As the pauper, I wanted something more understated but still beautiful, so I made a renaissance caul — a small, decorated cap worn at the back of the head.
I used a scrap of pink tulle from the petticoat as the base so it would blend in and let the ribbon work shine. I have a free pattern for how I assembled this cap available here: Renaissance Caul Pattern.
For the ribbon that created the diamond pattern across the cap, I wanted something that looked more historically inspired than the store‑bought options I was finding. I used silver embroidery floss and worked a very loose weave on a 3D‑printed Lucet fork to create a delicate, wired chain. The edges were finished with plain silver ribbon, and each diamond was decorated with off‑white pearl beads.

The Necklaces
In the movie, the girls wear matching necklaces with little hearts in the center, and we knew we just had to include that detail. The base of each necklace was made from an off‑white lace ribbon with a heart motif, then decorated with beads, chains, and small heart pendants. The construction was simple — just ribbon and beads — but it was such a cute nod to the original film that we couldn’t leave it out.

The Fans
The hand fans were added partly for fun and partly for practicality, especially since we wore these dresses to a Renfaire. The base of each fan was 3D‑printed, and we glued scrap fabric from the rest of the dresses into the center panel. The lace at the bottom was hand‑stitched to the glued fabric, and the edges were decorated with lace ribbon.
The handle had a small bar to connect the fan pieces were we were able to add beads on strong thread to create a dangling decorative element. They were simple, charming, and surprisingly useful on a hot day.

Notes from the Workroom
A single costume can hold a whole world if you look closely enough
Closing Thoughts
And that is everything that went into making these dresses. I still can’t believe they’re finished, or that they turned out as beautifully as they did. If I ever make a dress like this again, the only difference I would want to make is focusing more on natural materials — this gown gets quite warm since so much of it is made from modern synthetics. It was a compromise we made because of time, resources, and wanting to match the Barbie aesthetics and colors, but it came with consequences I’d prefer to avoid in my next costume.
Even so, I can’t complain. This is exactly the kind of dress I imagined making when I first started sewing, and even better, I got to complete every step with my best friend right beside me.
Looking back, I’m struck by how much this project reminded me why I love sewing in the first place. It’s slow, detailed work — the kind that asks you to be present, to trust your hands, and to let yourself enjoy the process instead of rushing toward the finish line. These gowns gave me permission to play again, to experiment, to make choices simply because they felt right in the moment. That’s a gift I didn’t expect when we started.
And beyond the technical challenges, there was something deeply comforting about building these dresses together. Sharing materials, troubleshooting tiny problems, celebrating each little breakthrough; it made the whole experience feel like its own story. A story just as special as the one the original the gowns were inspired by and it was stitched into the fabric just as much as the seams themselves. I’ll carry that with me for a long time.
Historical Sources and Further Reading
Burman, Barbara, and Ariane Fennetaux. 2020. The Pocket: A Hidden History of Women’s Lives, 1660–1900. Yale University Press. https://books.google.com/books?id=9RUOEAAAQBAJ.
Fashion, Costume, and Culture: Clothing, Headwear, Body Decorations, and Footwear Through the Ages. 2013. Vol. 3. UXL. https://archive.org/details/fashioncostumecu0003unse.
Hart, Avril. 1998. Historical Fashion in Detail : The 17Th and 18Th Centuries. V & A Publications. https://archive.org/details/historicalfashio0000hart.
Minute Man National Historical Park. 1976. Clothing for Ladies and Gentlemen of Higher and Lower Standing: A Working Pamphlet to Aid the Imitators of New England Citizens of the Eighteenth Century. Edited by Marjorie Hicks. U.S. Department of the Interior, National Park Service, Minute Man National Historical Park. https://books.google.com/books?id=LabOgY04kW4C.
Muzzarelli, Maria Giuseppina. 2014. “Veils, Caps and Hats: The Language of Headgear between the Middle Ages and the Renaissance.” Academia.Edu. https://www.academia.edu/88738416.
Pfiefer, Emily Catherine. 2014. “Undressed: Undergarments as Cultural Limina in Eighteenth-Century France.” Escholarship.Org. https://escholarship.org/uc/item/64d1d4r3.
Rose, Clare. 2007. “Bought, Stolen, Bequeathed, Preserved: Sources for the Study of 18Th-Century Petticoats.” Textiles and Text: Re-Establishing the Links Between …. https://www.academia.edu/629501.
Sareen, Hemant. 2020. “Waugh, Norah_ Woodward, Margaret – the Cut of Women’s Clothes, 1600-1930. (1968, Theatre Arts Books).Pdf.” Scribd, June 11. https://www.scribd.com/document/465276192/Waugh-Norah-Woodward-Margaret-The-cut-of-women-s-clothes-1600-1930-1968-Theatre-Arts-Books-pdf.
Sorge-English, Lynn. 2015. Stays and Body Image in London: The Staymaking Trade, 1680–1810. Routledge. https://books.google.com/books?id=qL06CgAAQBAJ.
Thompson, Jen, and View my complete profile. n.d. “How to Make an Easy Italian Chemise.” Festiveattyre.Com. Accessed October 26, 2026. http://www.festiveattyre.com/p/how-to-make-easy-italian-chemise.html.
Willett Cunnington, Cecil, and Phillis Cunnington. 1992. The History of Underclothes. Courier Corporation. https://books.google.com/books?id=36FPs4p8tjEC.
Williams, Kaiya. 2024. “The Freedom and Danger of Crinoline.” PDXScholar. https://pdxscholar.library.pdx.edu/younghistorians/2024/papers/19/.
0 Comments